In the modern industrial production, due to the processing machine and manufacturing principle, the production environment is difficult, and there may be a large number of heat, dust, moisture, corrosive liquid and vibration and other factors, which may affect the service life of components and connectors. Therefore, when manufacturing connectors used in the industrial field, it is not only necessary to waterproof and dustproof, but also to ensure that they will not Lost signal.
1、 The transmission speed of the machine should be fast
Production efficiency is very important for industrial production. Data transmission is one of the important links to improve efficiency and output, which is the technology that connector manufacturers need to pay attention to.
II. Good mask function of connector
good mask function is not only waterproof and dustproof, but also to prevent external signal interference and noise protection. In industrial production, there are many electronic equipment, so signal interference may be a serious problem. In order to ensure more stable transmission, dry interference must be reduced. In addition, noise is an important factor affecting the signal stability in noisy factories, so manufacturers of industrial connectors can make improvements according to environmental factors.
Good product design details of connector
due to the relatively large equipment and size of industrial production, but every detail is very important, even just a screw. Therefore, the manufacturer of industrial connector needs to investigate the details, for example, in order to avoid inserting in the wrong direction, there must be an anti dazzle door lock, in order to use the safety lock, there must be a nut, in addition, in order to make it available for each end face, it must be able to wire, and there must be a ground wire on the external board to connect it to the shell of the connector.
部分图文转载自网络，版权归原作者所有，如有侵权请联系我们删除。如内容中如涉及加盟，投资请注意风险，并谨慎决策
